LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-2553001.png)
Keyless Entry Transmitter Battery: Service and Repair
DOOR LOCK: TRANSMITTER BATTERY: REPLACEMENT
1. REPLACE TRANSMITTER BATTERY
NOTICE:
Take extra care when handling these precision electronic components.
(a) Push and hold the release knob in the direction indicated by the arrow in the illustration. Then take the mechanical key out of the case.
(b) Insert a precision screwdriver into the gap, and turn the screwdriver to detach the cover.
HINT
Tape the screwdriver tip before use.
(c) Insert a precision screwdriver into the gap and remove the battery (lithium battery: CR1632).
NOTICE:
*
Do not push the terminals with your finger.
*
Do not forcibly pry up the battery. The terminals may be damaged.
*
Do not touch the battery with wet hands. Water may cause rust.
*
Do not touch or move any components inside the transmitter. It may interfere with proper operation.
(d) Install a battery (lithium battery: CR1632) with the positive (+) side facing upward, as shown in the illustration.
NOTICE:
