LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Disconnect the connector.
(b) Detach the clamp, and remove the 2 screws and speaker.
NOTICE:
Do not touch the cone part of the speaker.
Installation
AUDIO / VISUAL: REAR DOOR SPEAKER (for Standard Body): INSTALLATION
HINT
*
Use the same procedures for the LH side and RH side.
*
The procedures listed below are for the LH side.
1. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (for 19 Speakers)
(a) Align the speaker to the door position pins A.
(b) Install the speaker with the 2 screws.
NOTICE:
Do not touch the cone part of the speaker.
(c) Attach the clamp and connect the connector.
2. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 19 Speakers)
(a) Temporarily install the speaker by attaching the claw of the speaker to the door panel.
(b) Install the speaker with the 3 screws.
NOTICE:
Do not touch the cone part of the speaker.
HINT
Install the screws in the order shown in the illustration.
(c) Connect the connector.