LS 460 RWD V8-4.6L (1UR-FSE) (2010)
HINT
Install the screws in the order shown in the illustration.
(c) Connect the connector.
3. INSTALL REAR NO. 1 SPEAKER ASSEMBLY
(a) Install the speaker and attach the clip.
(b) Install the 2 screws.
NOTICE:
Do not touch the cone part of the speaker.
(c) Connect the connector.
4. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY (w/ Rear Door Sunshade) See: Body and Frame/Doors, Hood and
Trunk/Doors/Rear Door/Testing and Inspection/Installation
5. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Testing and
Inspection/Installation
6. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Testing and Inspection/Installation
7. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Testing and
Inspection/Installation
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
9. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation
Components
AUDIO / VISUAL: REAR PACKAGE TRAY SPEAKER: COMPONENTS