LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Steering Mounted Controls Transmitter: Service and Repair
Installation
AUDIO / VISUAL: STEERING PAD SWITCH: INSTALLATION
1. INSTALL STEERING PAD SWITCH ASSEMBLY
(a) Install the switch with the 4 screws.
(b) Connect the connector.
2. INSTALL STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Steering
Pad/Installation
3. INSTALL SWITCH AND VOLUME CASE See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Installation
4. INSTALL NO. 2 STEERING WHEEL COVER LOWER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction- Initialization.
6. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation
7. INSPECT STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Testing and Inspection/Steering Pad
8. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.