LS 460 RWD V8-4.6L (1UR-FSE) (2010)
3. Within 10 seconds simultaneously operate the seatback angle switch to the rear side and the vertical height switch to the lower side until a beep is
heard.
4. Operate the slide control switch to the rearmost position.
When operating the control switch, the warning buzzer sounds.
After operating the slide control switch the following operations will occur automatically:
^
The head restraint automatically moves to the uppermost position and a beep is heard.
^ The seat cushion length automatically slides to the rearmost position and a beep is heard.
The two seat operations described above occur simultaneously.
5. Move the seatback angle switch forward until a beep is heard.