LS 460 RWD V8-4.6L (1UR-FSE) (2010)
*
The procedures listed below are for the LH side.
1. REMOVE DOOR INSIDE HANDLE BEZEL See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Overhaul/Removal
2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY See: Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Overhaul/Removal
3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH PANEL (for Passenger Side) See: Sensors and Switches/Sensors
and Switches - Windows and Glass/Power Window Switch/Service and Repair/Front Passenger Side Power Window Switch/Removal
4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH See: Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Overhaul/Removal
5. REMOVE SEAT MEMORY SWITCH
(a) Disconnect the connector.
(b) Detach the 4 claws and remove the seat memory switch.
Installation
SEAT: SEAT MEMORY SWITCH (for Front Side): INSTALLATION
HINT
*
Use the same procedures for the RH side and LH side.
*
The procedures listed below are for the LH side.
1. INSTALL SEAT MEMORY SWITCH
(a) Install the switch to the door trim panel with the 4 claws.
(b) Connect the connector.
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH See: Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Overhaul/Installation
3. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY See: Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Overhaul/Installation
4. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH PANEL (for Passenger Side) See: Sensors and Switches/Sensors
and Switches - Windows and Glass/Power Window Switch/Service and Repair/Front Passenger Side Power Window Switch/Installation
5. INSTALL DOOR INSIDE HANDLE BEZEL See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Overhaul/Installation