LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Seat Air Line: Service and Repair
Installation
SEAT: AIR HOSE (for Ottoman): INSTALLATION
HINT
A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard
Bolt - Specified Torque For Standard Bolts.
1. INSTALL AIR HOSE
(a) Attach the 2 claws to install the air hose.
(b) Install the 2 hose clamps and bolt.
Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)
(c) for RHD:
Install the hose clamp and bolt.
Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)
(d) Install the 2 hose clamps.
(e) Connect the air hose connector.
2. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and
Repair/Removal and Replacement/Rear Seat Outer Belt Assembly/Installation
3. INSTALL ROOF SIDE NO. 2 AIR DUCT LH See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Removal and
Replacement/Air Conditioning Unit (for Rear Side)/Installation
4. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate
Spring/Service and Repair/Installation
5. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate
Spring/Service and Repair/Installation
6. INSTALL REAR FLOOR FINISH PLATE See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Installation
7. INSTALL TOOL BOX (w/o Spare Tire)
8. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)