LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Disconnect the connector.
(b) Check the seat cushion heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(2) If the result is not as specified, replace the front seat set (cushion assembly, occupant classification ECU and 2 nuts).
(c) Check the seat cushion heater (wing part).
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(2) If the result is not as specified, replace the front seat set (cushion assembly, occupant classification ECU and 2 nuts).
Front Seatback Heater
SEAT: FRONT SEATBACK HEATER: INSPECTION