LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-3046023.png)
(a) Disconnect the connector.
(b) Check the seat cushion heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(2) If the result is not as specified, replace the front seat cushion cover.
(c) Check the seat cushion heater (wing part).
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(2) If the result is not as specified, replace the front seat cushion cover.
2. INSPECT FRONT SEAT CUSHION COVER SUB-ASSEMBLY RH
