LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-3069001.png)
Power Door Lock Switch: Testing and Inspection
Entry Lock and Unlock Switch (for Rear)
DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Rear): INSPECTION
1. INSPECT ENTRY LOCK AND UNLOCK SWITCH
(a) Disconnect the connectors.
(b) Remove the outside handle.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not as specified, replace the entry lock and unlock switch.
