LS 460 RWD V8-4.6L (1UR-FSE) (2010)
10. REMOVE LUGGAGE COMPARTMENT DOOR CLOSER SWITCH
(a) Disconnect the connector.
(b) Remove the 2 screws and door closer switch.
Installation
ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR CLOSER SWITCH: INSTALLATION
1. INSTALL LUGGAGE COMPARTMENT DOOR CLOSER SWITCH
(a) Connect the connector.
(b) Install the door closer switch with the 2 screws.
2. INSTALL BACK DOOR TRIM COVER
(a) Install the cover with the 10 clips.
(b) Attach the 4 clips.
3. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH
(a) Install the cover with the 3 clips.