LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(b) Remove the hose clip and No. 2 brake actuator hose.
(c) Remove the hose clip and reservoir connector.
30. REMOVE NO. 3 BRAKE ACTUATOR TUBE
NOTICE:
*
Do not damage the No. 3 brake actuator tube, brake actuator and brake accumulator pump.
*
When removing the No. 3 brake actuator tube, hold the tube, brake actuator and brake accumulator pump securely.
(a) Using a union nut wrench, disconnect the No. 3 brake actuator tube.
31. DISCONNECT BRAKE ACCUMULATOR PUMP CONNECTOR BOX
(a) Disconnect the brake accumulator pump connector box as follows:
(1) Detach the wiring harness clamp (labeled A).
(2) Remove the nut (labeled B) and connector box.