LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1627005.png)
(d) Except for coil spring type suspension:
(1) Disconnect the rear height control sensor connector (labeled A).
(2) Remove the nut (labeled B) and sensor clamp (labeled C).
(e) Remove the nut and sensor clamp.
(f) Disconnect the pad wear indicator connector.
(g) Remove the bolt and sensor clamp.
(h) Disconnect the connector from the rear speed sensor.
NOTICE:
*
Be careful not to damage the speed sensor.
*
Prevent foreign matter from adhering to the speed sensor.
17. REMOVE REAR SPEED SENSOR
(a) Remove the bolt and sensor.
NOTICE:
*
The rear speed sensor is easily damaged. When pulling out the rear speed sensor from the rear axle hub RH, do not use excessive
force to rotate and remove it.
*
Prevent foreign matter from attaching to the sensor tip.
*
Do not drop the sensor. If the sensor has been dropped, replace the sensor with a new one.
