LS 460 RWD V8-4.6L (1UR-FSE) (2010)
5. DISABLE BRAKE CONTROL
HINT
Using the Techstream to disable brake control causes the master pressure cut solenoid to turn OFF and the line from the master
cylinder to the front disc brake caliper to open.
(a) Check that the parking brake is set.
(b) Connect the Techstream to the DLC3 with the engine switch off.
(c) Turn the engine switch on (IG).
NOTICE:
Do not start the engine.
(d) Enter the following menus: Chassis / ABS/VSC/TRC / Utility / Electronically Controlled Brake system Utility / Electronically Controlled
Brake system Invalid. Then brake control is disabled.