LS 460 RWD V8-4.6L (1UR-FSE) (2010)
5. DISASSEMBLE BRAKE MASTER CYLINDER SUB-ASSEMBLY
(a) Remove the screw and brake master cylinder reservoir.
(b) Remove the 2 reservoir grommets from the brake master cylinder.
Reassembly
BRAKE: BRAKE MASTER CYLINDER: REASSEMBLY
1. ASSEMBLE BRAKE MASTER CYLINDER SUB-ASSEMBLY
(a) Apply lithium soap base glycol grease to 2 new reservoir grommets and install them to the brake master cylinder.
(b) Install the brake master cylinder reservoir with the screw.
Torque : 1.8 Nm (18 kgf-cm, 16 in-lbf)