LS 460 RWD V8-4.6L (1UR-FSE) (2010)
2. TEMPORARILY INSTALL MASTER CYLINDER PUSH ROD CLEVIS
(a) Temporarily install the lock nut and push rod clevis.
3. INSTALL BRAKE STROKE SIMULATOR CYLINDER SUB-ASSEMBLY
(a) Install a new brake master cylinder gasket (labeled A), brake stroke simulator bracket (labeled B) and brake stroke simulator cylinder (labeled
C) with the 2 bolts (labeled D).
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
4. INSTALL BRAKE MASTER CYLINDER BRACKET
(a) Install a new brake master cylinder gasket (labeled A) and brake master cylinder bracket (labeled B) to the brake master cylinder with
simulator with the 2 nuts (labeled C).
Torque : 13 Nm (127 kgf-cm, 9 ft-lbf)
5. INSTALL BRAKE STROKE SIMULATOR TUBE
(a) Using a union nut wrench, connect the brake stroke simulator tube to the brake master cylinder with simulator.
Torque : 15 Nm (155 kgf-cm, 11 ft-lbf)