LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(d) Install the bearing caps See: Service and Repair/Camshaft (For Bank 1)/Installation.
NOTICE:
Do not turn the camshaft.
(e) Install the camshaft housing See: Service and Repair/Camshaft (For Bank 1)/Installation.
NOTICE:
Do not turn the camshaft.
(f) Remove the bearing caps See: Service and Repair/Camshaft (For Bank 1)/Removal.
(g) Measure the Plastigage at its widest point.
Standard oil clearance:
Maximum oil clearance:
(h) If the oil clearance is greater than the maximum, replace the camshaft. If necessary, replace the camshaft housing.