LS 460 RWD V8-4.6L (1UR-FSE) (2010)
NOTICE:
*
Do not remove the oil filter bracket clip.
*
Make sure that the oil filter is installed securely as shown in the illustration.
*
Be careful that the O-ring does not get caught between the parts.
(g) Apply a small amount of engine oil to a new drain plug O-ring, and install it to the oil filter cap.
NOTICE:
Before installing the O-ring, remove any dirt or foreign matter from the installation surface of the oil filter cap.
(h) Install the oil filter drain plug.
Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)
NOTICE:
Be careful that the O-ring does not get caught between the parts.
5. ADD ENGINE OIL
(a) Add fresh oil and install the oil cap.
Standard engine oil:
Standard capacity:
(b) Install the oil filler cap.
(c) Close the oil filler cap service hole cover.