LS 460 RWD V8-4.6L (1UR-FSE) (2010)
To disconnect the injector driver connectors, push the claw downward and move the lock lever to release the lock.
(b) Disconnect the 2 clamps from the injector driver.
(c) Remove the 2 bolts, 2 nuts and injector driver from the intake manifold.
17. REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY
(a) Slide the 4 clamps and disconnect the heater water inlet hose, heater water outlet hose, water inlet hose, and No. 3 water by-pass hose from the
water by-pass pipe.
(b) Remove the 2 bolts and water by-pass pipe.
18. REMOVE PURGE VSV
(a) Disconnect the fuel vapor feed hose and No. 2 fuel vapor feed hose.
(b) Remove the bolt and purge VSV.
19. REMOVE INTAKE MANIFOLD
(a) Disconnect the PCV hose from the intake manifold.
(b) Remove the 8 bolts, 2 nuts and intake manifold.
(c) Remove the 2 gaskets from the intake manifold.