LS 460 RWD V8-4.6L (1UR-FSE) (2010)
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
12. ADD ENGINE COOLANT See: Cooling System/Coolant/Service and Repair
13. INSPECT FOR ENGINE COOLANT LEAK See: Cooling System/Testing and Inspection/Component Tests and General Diagnostics
14. INSTALL ENGINE ROOM SIDE COVER RH See: Service and Repair/Removal and Replacement/Engine/Installation
15. INSTALL AIR CLEANER INLET COVER See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
16. INSTALL V-BANK COVER SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
17. INSTALL NO. 2 ENGINE UNDER COVER See: Service and Repair/Removal and Replacement/Engine/Installation
18. INSTALL FRONT SUSPENSION MEMBER PROTECTOR LOWER See: Service and Repair/Removal and Replacement/Engine/Installation
19. INSTALL NO. 1 ENGINE UNDER COVER See: Cooling System/Coolant/Service and Repair
20. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation