LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Oil Level Sensor: Service and Repair
Installation
1UR-FSE LUBRICATION: OIL LEVEL SENSOR (for 2WD): INSTALLATION
1. INSTALL ENGINE OIL LEVEL SENSOR
(a) Install a new gasket to the engine oil level sensor.
(b) Insert the engine oil level sensor into the oil pan and rotate it 180°.
(c) Install the engine oil level sensor with the 4 bolts.
Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)
(d) Connect the engine oil level sensor connector.
2. INSTALL CRANK POSITION SENSOR BRACKET
(a) Install the crank position sensor bracket with the bolt.
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)
(b) Connect the harness clamp.
3. CONNECT OIL COOLER TUBE