LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Connect the No. 1 oil cooler inlet tube and No. 1 oil cooler outlet tube by installing the 2 clamps with the 2 bolts.
Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)
4. ADD ENGINE OIL See: Engine Lubrication/Engine Oil/Service and Repair/Replacement
5. INSPECT FOR ENGINE OIL LEAK See: Oil Pressure Sender/Service and Repair/Installation
6. CHECK ENGINE OIL LEVEL See: Engine Lubrication/Testing and Inspection
7. INSTALL FRONT SUSPENSION MEMBER PROTECTOR LOWER See: Service and Repair/Removal and Replacement/Engine/Installation
8. INSTALL NO. 2 ENGINE UNDER COVER See: Service and Repair/Removal and Replacement/Engine/Installation
9. INSTALL NO. 1 ENGINE UNDER COVER See: Cooling System/Coolant/Service and Repair