LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Remove the No. 2 steering intermediate shaft See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Removal.
(b) w/o VGRS:
Remove the No. 2 steering intermediate shaft See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Removal.
33. REMOVE POWER STEERING LINK ASSEMBLY
(a) w/ VGRS:
Remove the power steering link See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine/Removal.
(b) w/o VGRS:
Remove the power steering link See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine/Removal.
34. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service
and Repair/Removal
35. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY (for Bank 1) See: Engine, Cooling and Exhaust/Exhaust System/Exhaust
Manifold/Service and Repair/Removal
36. DISCONNECT SUCTION HOSE SUB-ASSEMBLY
(a) Remove the bolt and disconnect the cooler refrigerant suction hose from the cooler compressor.
(b) Remove the O-ring from the cooler refrigerant suction hose.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
37. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
(a) Remove the bolt and disconnect the cooler refrigerant discharge hose from the cooler compressor.
(b) Remove the O-ring from the cooler refrigerant discharge hose.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
38. REMOVE COOLER COMPRESSOR ASSEMBLY