LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-2269004.png)
30. INSTALL FRONT WHEEL
31. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
32. CHECK AND ADJUST FRONT WHEEL ALIGNMENT
(a) Check and adjust the front wheel alignment See: Maintenance/Alignment/Service and Repair/Front Wheel Alignment.
33. CHECK SHIFT LEVER POSITION See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Service and
Repair/Removal and Replacement/AA80E Automatic Transmission/Floor Shift Assembly/Installation
34. INSTALL FRONT SUSPENSION MEMBER PROTECTOR LOWER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal
and Replacement/Engine/Installation
35. INSTALL NO. 2 ENGINE UNDER COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
36. INSTALL NO. 1 ENGINE UNDER COVER See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
37. INSTALL V-BANK COVER SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
38. INSTALL ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
39. INSTALL ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
40. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Installation
41. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
42. INSTALL COWL TOP VENTILATOR LOUVER RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation
43. ADD COMPRESSOR OIL See: Service and Repair
44. CHARGE REFRIGERANT See: Service and Repair
45. WARM UP ENGINE See: Service and Repair
46. CHECK FOR LEAKAGE OF REFRIGERANT See: Service and Repair
