LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-3239002.png)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(b) If the result is not as specified, replace the rheostat.
(c) Inspect the switch illumination.
(1) Connect the battery positive (+) lead to terminal 8 (ILL+) and the negative (-) lead to terminal 6 (ILL-), then check that the light comes on.
OK:
LED comes on.
(2) If the result is not as specified, replace the rheostat.
