LS 460 RWD V8-4.6L (1UR-FSE) (2010)
*
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table
before disconnecting the cable from the negative (-) battery terminal.
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:
*
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
3. REMOVE MAP LIGHT ASSEMBLY
(a) Using a screwdriver, detach the 2 claws and 2 covers.
HINT
Tape the screwdriver tip before use.
(b) Remove the 2 screws.
(c) Using a moulding remover, detach the 2 clips.
(d) Disconnect the connectors and remove the map light.
Installation
LIGHTING: ROOM LIGHT ASSEMBLY (for Front): INSTALLATION
1. INSTALL MAP LIGHT ASSEMBLY
(a) Connect the connectors.
(b) Attach the 2 clips.