LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Disconnect the B14 ECU connector.
(b) Disconnect the B6*1 or B10*2 horn connector.
*1: for High Pitched Horn
*2: for Low Pitched Horn
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
for High pitched horn
for Low pitched horn
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
5. INSPECT STEERING PAD (HORN BUTTON)
(a) Remove the steering pad See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removal and Replacement/Steering
Wheel/Removal.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE STEERING PAD (HORN BUTTON) See: Steering and Suspension/Steering/Steering Wheel/Service and