LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Headlamp Alignment Control Module: Service and Repair
Installation
LIGHTING: AFS ECU: INSTALLATION
1. INSTALL AFS ECU
(a) Install the AFS ECU with the 3 nuts.
(b) Connect the connector and clamp.
2. INSTALL COWL SIDE TRIM BOARD RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Standard Body)/Installation
3. INSTALL FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Standard Body)/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
CAUTION:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
5. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation
6. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT See: Headlamp/Adjustments
7. PREPARATION FOR HEADLIGHT AIMING (Using a screen) See: Headlamp/Adjustments
8. HEADLIGHT AIMING INSPECTION See: Headlamp/Adjustments
9. HEADLIGHT AIMING ADJUSTMENT See: Headlamp/Adjustments