LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(b) Inspect the rear No. 1 suspension arm.
(1) Measure the distance between the centers of the 2 installation bolts of the rear No. 1 suspension arm.
Standard length:
361.3 to 362.1 mm (14.224 to 14.256 in.)
HINT
If the distance is not within the specified range, replace the rear No. 1 suspension arm.
(c) Inspect the rear No. 2 suspension arm.
(1) Measure the distance between the centers of the 2 installation bolts of the rear No. 2 suspension arm.
Standard length:
426.8 to 427.6 mm (16.803 to 16.835 in.)
HINT
If the distance is not within the specified range, replace the rear No. 2 suspension arm.
(d) Inspect the rear upper No. 1 control arm.
(1) Measure the distance between the centers of the installation bolt of the rear upper No. 1 control arm and the ball joint stud.
Standard length:
208.5 to 209.3 mm (8.209 to 8.240 in.)
HINT
If the distance is not within the specified range, replace the rear upper No. 1 control arm.