LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1200008.png)
without SST - Torque : 44 Nm (449 kgf-cm, 32 ft-lbf)
with SST - Torque : 40 Nm (408 kgf-cm, 30 ft-lbf)
NOTICE:
Use a torque wrench with a fulcrum length of 300 mm (11.81 in.)
2. INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
(a) Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.
SST : 09224-00010
without SST - Torque : 44 Nm (449 kgf-cm, 32 ft-lbf)
with SST - Torque : 40 Nm (408 kgf-cm, 30 ft-lbf)
NOTICE:
Use a torque wrench with a fulcrum length of 300 mm (11.81 in.)
3. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service and
Repair/Installation
4. INSTALL NO. 2 EXHAUST MANIFOLD HEAT INSULATOR See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service
and Repair/Installation
5. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service and
Repair/Installation
6. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service
and Repair/Installation
7. INSTALL OIL DIPSTICK GUIDE See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine/Installation
8. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT LH See: Steering and Suspension/Suspension/Stabilizer Bar/Service and
Repair/Front Stabilizer Bar/Installation
9. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH See: Steering and Suspension/Suspension/Stabilizer Bar/Service and
Repair/Front Stabilizer Bar/Installation
10. INSTALL ENGINE UNDER COVER SUB-ASSEMBLY LH See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front
Stabilizer Bar/Installation
11. INSTALL ENGINE UNDER COVER SUB-ASSEMBLY RH See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front
Stabilizer Bar/Installation
12. INSTALL FRONT STABILIZER BAR See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/AA80E Automatic Transmission/Transmission Assembly/Installation
13. INSTALL ENGINE UNDER COVER REAR LH See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Stabilizer
Bar/Installation
14. INSTALL ENGINE UNDER COVER REAR RH See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Stabilizer
Bar/Installation
