LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Variable Valve Timing Actuator Position Sensor: Service and Repair
Removal
1UR-FSE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Removal
2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY See: Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Removal
3. REMOVE NO. 1 AIR CLEANER INLET See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Removal
4. REMOVE AIR CLEANER ASSEMBLY LH
(a) Disconnect the MAF meter connector.
(b) Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap LH.
(c) Remove the element from the air cleaner case.
(d) Remove the 2 nuts, clip and air cleaner case.
5. REMOVE AIR CLEANER ASSEMBLY RH
(a) Disconnect the MAF meter connector.
(b) Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap RH.
(c) Remove the element from the air cleaner case.
(d) Remove the 2 nuts, clip and air cleaner case.