LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(b) Install the bracket with the 2 bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
3. CONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY
(a) Push in the tube connector to the pipe until the tube connector makes a "click" sound.
(b) Push down on the retainer to lock it in place.
NOTICE:
*
Check that there is no damage or foreign objects on the connected part of the fuel pipe.
*
After connecting, check that the fuel tube connector and the pipe are securely connected by pulling on them.
4. INSTALL INTAKE MANIFOLD
(a) Install the intake manifold See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Installation.
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable to the negative (-) battery terminal.
7. ADD ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
8. INSPECT FOR COOLANT LEAK See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection/Component Tests and General
Diagnostics