LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Install the air cleaner cap LH.
4. INSTALL AIR CLEANER CAP RH
(a) Install the air cleaner cap RH.
5. INSTALL INTAKE AIR CONNECTOR PIPE See: Throttle Body/Service and Repair/Installation
6. INSTALL NO. 1 AIR CLEANER INLET See: Throttle Body/Service and Repair/Installation
7. INSTALL V-BANK COVER SUB-ASSEMBLY See: Throttle Body/Service and Repair/Installation
8. INSTALL ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
9. INSTALL ENGINE ROOM SIDE COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
10. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY See: Throttle Body/Service and Repair/Installation
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation
13. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.