LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. ADD ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
6. INSPECT FOR ENGINE COOLANT LEAK See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection/Component Tests and
General Diagnostics
7. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY
(a) Attach the 4 clips B.
NOTICE:
*
Make sure the clips are attached securely.
*
Attaching the clips forcefully or hitting the top of the clips may damage them.
(b) Install the air cleaner inlet cover with the 5 clips A.
8. INSTALL V-BANK COVER SUB-ASSEMBLY
(a) Slide the cover from the vehicle front toward the rear of the vehicle to attach the 2 clips labeled A, and then attach the 4 clips labeled B to
install the V bank cover.
NOTICE:
*
Make sure the clips are attached securely.
*
Attaching the clips forcefully or hitting the top of the clips may damage them.
*
When attaching the clips labeled A, be sure to slide the cover from the front of the vehicle toward the rear of the vehicle.
9. INSTALL NO. 1 ENGINE UNDER COVER See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
10. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation
11. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning.