LS 460 RWD V8-4.6L (1UR-FSE) (2010)
25. REMOVE OIL DIPSTICK GUIDE See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine/Removal
26. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service
and Repair/Removal
27. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service and
Repair/Removal
28. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service
and Repair/Removal
29. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service and
Repair/Removal
30. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
(a) Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.
SST : 09224-00010
31. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
(a) Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.
SST : 09224-00010
Installation
1UR-FSE ENGINE CONTROL SYSTEM: AIR FUEL RATIO SENSOR (for 2WD): INSTALLATION
1. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
(a) Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.
SST : 09224-00010