LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1065001.png)
Oxygen Sensor: Testing and Inspection
Heated Oxygen Sensor
1UR-FSE ENGINE CONTROL SYSTEM: HEATED OXYGEN SENSOR (for 2WD): ON-VEHICLE INSPECTION
1. INSPECT HEATED OXYGEN SENSOR
(a) Disconnect the heated oxygen sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(c) If the result is not as specified, replace the sensor.
