LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Central Control Module: Service and Repair
Installation
AUDIO / VISUAL: MULTI-MEDIA INTERFACE ECU: INSTALLATION
HINT
A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard
Bolt - Specified Torque For Standard Bolts.
1. INSTALL NO. 1 MULTI-MEDIA INTERFACE BRACKET
(a) Set the aligning protrusions of the bracket, labeled A, into the holes of the multi-media interface ECU.
(b) Install the No. 1 multi-media interface bracket with the 2 screws labeled B.
2. INSTALL NO. 2 MULTI-MEDIA INTERFACE BRACKET
(a) Set the aligning protrusions of the bracket, labeled A, into the holes of the multi-media interface ECU.
(b) Install the No. 2 multi-media interface bracket with the 2 screws labeled B.
3. INSTALL MULTI-MEDIA INTERFACE ECU
(a) Install the multi-media interface ECU with the 2 bolts.
(b) Connect the 3 connectors.
4. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY See: Windows and Glass/Windows/Window Shade/Service and Repair/Rear
Sunshade Assembly/Installation
5. INSTALL INNER ROOF SIDE GARNISH RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Standard Body)/Installation
6. INSTALL INNER ROOF SIDE GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Standard Body)/Installation
7. INSTALL REAR SEAT SIDE GARNISH RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Standard Body)/Installation
8. INSTALL REAR SEAT SIDE GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Standard Body)/Installation
9. INSTALL REAR SEAT ASSEMBLY