LS 460 RWD V8-4.6L (1UR-FSE) (2010)
5. INSTALL ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
6. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Installation
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation
9. PERFORM RESET MEMORY
NOTICE:
Perform the RESET MEMORY (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM.
*
for 2WD: See: Powertrain Management/Transmission Control Systems/Testing and Inspection/Programming and Relearning/AA80E
Automatic Transmission System/Initialization
*
for AWD: See: Powertrain Management/Transmission Control Systems/Testing and Inspection/Programming and Relearning/AA80F
Automatic Transmission System/Initialization
HINT
Initialization cannot be completed by only removing the battery.
10. SHIFT CONTROL SYNCHRONIZATION (for Sport Package) See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Programming and Relearning
11. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.