LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-2373017.png)
CAUTION:
*
The driver side knee airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after
deployment.
*
Use gloves and safety glasses when handling a driver side knee airbag with a deployed airbag.
*
Do not apply water to a driver side knee airbag with a deployed airbag.
*
Always wash your hands with water after completing the operation.
(1) Remove the driver side knee airbag from the tire.
(2) Place the driver side knee airbag in a plastic bag, tie it tightly and dispose of it in the same way as other general parts.
Front Passenger Airbag Assembly
SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: DISPOSAL
HINT
When scrapping a vehicle equipped with the SRS or disposing of the front passenger airbag, be sure to deploy the airbag first in
accordance with the procedure described below. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT.
of the TOYOTA MOTOR SALES, U.S.A., INC.
CAUTION:
*
Never dispose of a front passenger airbag that has an unactivated airbag.
*
The airbag produces an exploding sound when it is deployed, so perform the operation outdoors and where it will not create a
nuisance to nearby residents.
*
When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool). Perform the operation in a place away
from electrical noise.
*
When deploying the airbag, perform the operation at least 10 m (33 ft.) away from the front passenger airbag.
*
The front passenger airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after
deployment.
*
Use gloves and safety glasses when handling a front passenger airbag with a deployed airbag.
*
Do not apply water to a front passenger airbag with a deployed airbag.
*
Always wash your hands with water after completing the operation.
*
An airbag or pretensioner may be activated by static electricity. To prevent this, be sure to touch a metal surface with bare hands
to discharge static electricity before performing this procedure.
1. DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE)
HINT
Prepare a battery as the power source to deploy the airbag.
(a) Check the function of SST See: Removal and Replacement/Steering Pad/Removal.
(b) Read the precaution See: Service Precautions.
(c) Disconnect the cable from the negative (-) battery terminal.
CAUTION:
