LS 460 RWD V8-4.6L (1UR-FSE) (2010)
before disconnecting the cable from the negative (-) battery terminal.
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:
*
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
2. REMOVE SWITCH AND VOLUME CASE
(a) Using a screwdriver, detach the claw to remove the switch.
HINT
Tape the screwdriver tip before use.
3. REMOVE LOWER NO. 2 STEERING WHEEL COVER
(a) Using a screwdriver, detach the 2 claws to remove the No. 2 steering wheel cover.
HINT
Tape the screwdriver tip before use.
4. REMOVE STEERING PAD
(a) Using a T30 "TORX" socket wrench, loosen the 2 "TORX" screws until the groove along the screw circumference catches on the screw case.
(b) Pull out the steering pad from the steering wheel, as shown in the illustration. Then support the steering pad with one hand.