LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-2437001.png)
Seat Belt: Procedures
Front Seat Outer Belt Assembly
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: DISPOSAL
HINT
When scrapping vehicles equipped with a seat belt pretensioner or disposing of a front seat outer belt (with seat belt pretensioner),
always first activate the seat belt pretensioner in accordance with the procedures described below. If any abnormality occurs during
activation of the seat belt pretensioner, contact the SERVICE DEPARTMENT of TOYOTA MOTOR SALES, U.S.A., INC.
CAUTION:
*
Never dispose of a front seat outer belt that has a non-activated pretensioner.
*
The seat belt pretensioner produces a loud, exploding sound when it activates. Perform the operation where it will not be a
nuisance to nearby people.
*
When activating a front seat outer belt (with seat belt pretensioner), stand at least 10 m (33 ft.) away from the front seat outer
belt.
*
Use gloves and safety glasses when handling a front seat outer belt with an activated pretensioner.
*
Always wash your hands with water after completing the disposal.
*
Do not apply water to a front seat outer belt that has an activated pretensioner.
*
Perform procedures in a place away from electrical interference.
*
When activating the seat belt pretensioner, always use the specified SST (SRS airbag deployment tool).
1. DISPOSE OF FRONT SEAT OUTER BELT ASSEMBLY (WHEN INSTALLED IN VEHICLE)
HINT
Prepare a battery to activate the seat belt pretensioner.
(a) Check if SST is functioning properly.
SST : 09082-00700
CAUTION:
When activating the seat belt pretensioner, always use the specified SST.
