LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(e) Remove the 2 bolts and seat belt.
11. REMOVE HEIGHT ADJUSTABLE ANCHOR MOTOR LH
(a) Remove the connector.
(b) Pull the motor downward to remove it front the adjuster as shown in the illustration.
12. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
(a) Remove the 2 bolts and adjuster.
Installation
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: INSTALLATION
HINT
*
Use the same procedure for the RH and LH sides.
*
The procedure listed below is for the LH side.
*
A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard
Bolt - Specified Torque For Standard Bolts.
1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
(a) Install the seat belt with the 2 bolts. First install the upper bolt, and then install the lower bolt.