LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(b) Using a moulding remover, detach the 4 claws and remove the 2 belt guides.
(1) Disengage the 2 clips and raise the front portion of the package tray trim panel assembly.
(2) Pass the 2 rear seat belt floor anchors through the package tray trim panel assembly.
(3) Disengage the 5 claws and remove the package tray trim panel assembly.
20. REMOVE ROOF SIDE NO. 2 AIR DUCT LH (w/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and
Repair/Removal and Replacement/Air Conditioning Unit (for Rear Side)/Removal
21. REMOVE ROOF SIDE NO. 2 AIR DUCT RH (w/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and
Repair/Removal and Replacement/Air Conditioning Unit (for Rear Side)/Removal
22. REMOVE NO. 4 AIR DUCT REAR (w/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and
Repair/Removal and Replacement/Air Conditioning Unit (for Rear Side)/Removal
23. REMOVE NO. 5 AIR DUCT REAR (w/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and
Repair/Removal and Replacement/Air Conditioning Unit (for Rear Side)/Removal
24. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH
(a) Disconnect the pretensioner connector, as shown in the illustration.