LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Install the belt with the bolt.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
3. INSTALL REAR SEAT INNER BELT ASSEMBLY RH
HINT
Use the same procedure described for the LH side.
4. INSTALL REAR SEAT ASSEMBLY
(a) Install the rear seat See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for Power
Seat)/Installation.
Components
SEAT BELT: SHOULDER BELT ANCHORAGE SWITCH: COMPONENTS
Removal
SEAT BELT: SHOULDER BELT ANCHORAGE SWITCH: REMOVAL
HINT
*
Use the same procedure for the RH and LH sides.
*
The procedure listed below is for the LH side.
1. REMOVE COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
*
w/ Navigation System (for HDD):
*
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table