LS 460 RWD V8-4.6L (1UR-FSE) (2010)
6. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal
7. REMOVE RADIATOR GRILLE See: Body and Frame/Grille/Service and Repair/Removal and Replacement/Removal
8. REMOVE FRONT FENDER WHEEL OPENING MOULDING LH
9. REMOVE FRONT FENDER WHEEL OPENING MOULDING RH
HINT
Use the same procedure described for the LH side.
10. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH
11. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
HINT
Use the same procedure described for the LH side.
12. REMOVE FRONT FENDER LINER LH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Removal
13. REMOVE FRONT FENDER LINER RH
HINT
Use the same procedure described for the LH side.
14. REMOVE FRONT BUMPER COVER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Removal
15. REMOVE NO. 4 ENGINE ROOM WIRE See: Body and Frame/Bumper/Front Bumper/Service and Repair/Overhaul/Disassembly
16. REMOVE NO. 1 ULTRASONIC SENSOR
(a) Remove the sensors from the 4 sensor retainers as shown in the illustration.
NOTICE:
*
Be careful not to damage the retainer.
*
Do not forcibly remove the retainer from the bumper cover.
17. REMOVE NO. 2 ULTRASONIC SENSOR
(a) Remove the sensors from the 2 sensor retainers as shown in the illustration.
NOTICE:
*
Be careful not to damage the retainer.
*
Do not forcibly remove the retainer from the bumper cover.