LS 460 RWD V8-4.6L (1UR-FSE) (2010)
4. INSTALL FRONT BUMPER COVER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Installation
5. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
6. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
HINT
Use the same procedure described for the LH side.
7. INSTALL FRONT FENDER LINER LH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
8. INSTALL FRONT FENDER LINER RH
HINT
Use the same procedure described for the LH side.
9. INSTALL RADIATOR GRILLE See: Body and Frame/Grille/Service and Repair/Removal and Replacement/Installation
10. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Installation
11. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Installation
12. INSTALL ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
13. INSTALL ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some system need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
15. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation