LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Power Door Lock Switch: Service and Repair
Entry Lock and Unlock Switch (for Front)
Components
DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Front): COMPONENTS
Removal
DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Front): REMOVAL
HINT
*
Use the same procedure for the RH and LH sides.
*
The procedure listed below is for the LH side.
1. REMOVE COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
*
w/ Navigation System (for HDD):
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table
before disconnecting the cable from the negative (-) battery terminal.
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:
*
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction- Initialization.
3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and