LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Trunk / Liftgate Switch: Service and Repair
Luggage Compartment Door Opener Main Switch
Components
ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH: COMPONENTS
Removal
ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH: REMOVAL
1. REMOVE COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
*
w/ Navigation System (for HDD):
*
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table
before disconnecting the cable from the negative (-) battery terminal.
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:
*
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Front Console Box (w/ Rear Seat Entertainment System)/Removal
4. REMOVE INSTRUMENT SIDE PANEL RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal