LS 460 RWD V8-4.6L (1UR-FSE) (2010)
13. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
14. REMOVE BACK DOOR GARNISH RETAINER SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service
and Repair/Removal
15. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY
(a) Open the screw caps and remove the 2 screws.
(b) Detach the 4 claws and remove the opening switch.
Installation
ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH: INSTALLATION
1. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY
(a) Attach the 4 claws to install the opening switch.
(b) Install the 2 screws and close the screw caps.
2. INSTALL BACK DOOR GARNISH RETAINER SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Installation
3. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY