LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Installation
AIR CONDITIONING: AMBIENT TEMPERATURE SENSOR: INSTALLATION
1. INSTALL AMBIENT TEMPERATURE SENSOR
(a) Attach the clamp to install the sensor.
(b) Connect the connector.
2. INSTALL FRONT BUMPER COVER
(a) Install the front bumper cover See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Installation.
3. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
5. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.